C-Max P3 Indoor SMD Die-Cast Aluminum Cabinet LED Display

This LED display excellent for outdoor installation of glass curtain wall. No need of steel structure while installation, educing steel structure weight 50kgs/m2, 60%-80% transparency, making glass curtain wall more vivid and without affecting the views. Advantages: 1. Light weight, thin and transparent 2. Transparency ratio up to 63% 3. Strong adaptablity 4. Low power consumption 5. Front and rear serviceable 6. High-cost effective witnout supporting structure 7. Fast plug in and out the power cable and signal cable Application: outdoor upper-air glass curtain wall, outdoor partition wall, exhibition hall, airport, park landscape etc.

C-Vent, ventilating leads to high heat radiating, no need fan or air-conditioner, reducing 50% energy consumption. Advantages: 1. Ventilating: Air can transmit the display body directly, ventilation rate 50%. 2. No light penetration: Penetrating design without light penetration, no harm to contrast ratio, full conservated the display effect. 3. Front access: Front-maintenance module is convenient for disassembly and assembly. 4. Low windage resistance: Lower requirement of steel structure, 35% structure cost saved. 5. Air-conditioner exonerated: Ventilating leads to high radiating, no need fan or air-conditioner. 6. Energy-saving & environmental protection: Low power consumption, 50% energy saving. 7. High applicability: IP65 fully sealing design, rain proof, dust proof, adapted to all weather surroundings.

The C-lite series is a type of highly cost-effective rental LED screen for varieties of activities; the die-casting aluminum cabinets with fast locks and convenient cable connectors will help users install & disassemble quickly and easily. Meanwhile, you can also add scale locks to make a curved LED screen. Features: 1. Pixel pitch: 2.6, 2.97, 3.91, 4.81mm (outdoor and indoor) 2. Size: 500*500/500*1000mm 3. Modules magnetic installation (indoor), fast assembly, and fast dismounting. 4. The cabinets of different batches are of the same size, solid and durable, and not easy to deform. 5. Casting aluminum cabinet, ultra-high flatness, whole cabinet flatness≤0.01mm. 6. Power and data connected fast, long life devices, 500,000 times pull and plug. 7. Easy operation, one click to light up the screen. Application: Rental screens for weddings, conferences, concerts, launch events, and all kinds of activities; also can be used as mobile display solutions and permanent display solutions, such as led screens for mobile trailers, and stadium perimeter display screens.

Quick Details • Cabinet size: 1280*960mm/pcs • Brightness: 6000~6500nits • Front and rear maintenance Advantages • New stadium base design，The angle between the screen and the ground can be adjusted from 30° to 90° to ensure the viewing angle of the audience. • Soft face shield protection, athletes and LED screens are perfectly protected. • The cabinet is made of cast aluminum, which is light and thin, and has good heat dissipation, which slows down the aging of the power module. • The module can be maintained quickly and the operation is simple and convenient. • High protection, protection level ≥IP65. • Strong compatibility, both indoor and outdoor courts can be hoisted and stacked to meet the needs of customers in multiple occasions. • Energy-saving, about 1/3 energy-saving than the traditional screen, greatly reducing the operating cost of the display. • Professional stadium playback software, diversified input of camera video sources, support for DP, HDMD, VGA, SDL, DVD, etc.

Features: 1 Good flatness: the screen adopts die-casting aluminum cabinets with a tolerance within 0.1mm; 2 Ultra-thin: the die-casting aluminum cabinets are 20% thinner and 15kg/㎡ than iron cabinets, which helps reduce transportation and framework costs significantly; 3 Easy to upgrade and replace: the cabinets are adapted to our P2.5~P16 modules; so you do not have to change the cabinets for an upgrade, this will save a lot of manpower and cabinet costs; 4 Multiple purposes: As a large display solution, the C-Fit series is widely used as outdoor advertising screens, stage rental screens, and stadium perimeter LED display screens; the C-Fit series is not only used as permanently wall-mounted screens but also used as ground-stacked screens for small events or spaces with low ceilings; 5 High brightness: the brightness reaches 3700~4200CD/㎡, so the screen can still present clear pictures under strong light; 6 Slow temperature rise, efficient heat dissipation: the heat-dissipation device adopts aluminum magnesium alloy material with excellent heat conduction; 7 Highly cost-effective: an IP65-rated enclosure provides protection against all kinds of bad weather conditions, such as water jets, salt spray, salt corrosion, and wind erosion; 8 High reliability: all the modules adopt seal technique and high-quality copper wire;

P0.95,P1.26,P1.58,P1.9 C-Pad-U is quick & easy wall mounting solutions, designed in a perfect 16:9 ratio to get HD 2K 4K LED video wall and camera friendly display. Features: • Golden ratio 16:9, cabinet size 608*342mm, 4 cabinets form a 55 inch LED display. • Magnetically modules and fully front serviceable design, easy installation and maintenance. • Lightweight tiles design allows it to be easily packed and stacked. • Internal cabling is all quick release allowing for tool less service. • 3840Hz refresh rate which eliminates scan lines and flicker in your display on camera. • 160° horizontal and vertical viewing angle and increased grayscale capabilities. Application: Widely used in auditorium, conference room, banquet hall, secturity monitoring, command system, etc.

Module features： 1,Easy：Modular design, easy assembly and maintenance. 2，module size：250*250mm ,Smooth surface, module gap small ，High precision Cabinet features： ●  Light：Cabinet size:500*500*86mm, Weight: 8.5kg/pc. ● Thin：Die-cast aluminum design, high precision, thickness only 86mm. ● Fast：Fast locks, Easy to assemble and disassemble. ● Compatibility：Available pixel pitch for P2.6，P3, P3.91，P4, P5, P6. ● Low：Excellent cooling design, no fans or air-conditioners needed noiseless, low power consumption, cost-effective.

Portable traffic warning sign is for traffic accident scenes, security checkpoints, drunk driving inspections, and various emergencies. Features 1. Foldable, use linkage system, flexible retractable 2. With pneumatic lifting function 3. Eight-shaped base support frame, wind-resistant design, open with one click. 4. With wheels and handles, easy to carry 5. Equipped with warning lights and display 6. Built-in black box and high-definition camera (optional)

This LED display excellent for outdoor installation of glass curtain wall. No need of steel structure while installation, educing steel structure weight 50kgs/m2, 60%-80% transparency, making glass curtain wall more vivid and without affecting the views. Advantages: 1. Light weight, thin and transparent 2. Transparency ratio up to 63% 3. Strong adaptablity 4. Low power consumption 5. Front and rear serviceable 6. High-cost effective witnout supporting structure 7. Fast plug in and out the power cable and signal cable Application: outdoor upper-air glass curtain wall, outdoor partition wall, exhibition hall, airport, park landscape etc.

C-Vent, ventilating leads to high heat radiating, no need fan or air-conditioner, reducing 50% energy consumption. Advantages: 1. Ventilating: Air can transmit the display body directly, ventilation rate 50%. 2. No light penetration: Penetrating design without light penetration, no harm to contrast ratio, full conservated the display effect. 3. Front access: Front-maintenance module is convenient for disassembly and assembly. 4. Low windage resistance: Lower requirement of steel structure, 35% structure cost saved. 5. Air-conditioner exonerated: Ventilating leads to high radiating, no need fan or air-conditioner. 6. Energy-saving & environmental protection: Low power consumption, 50% energy saving. 7. High applicability: IP65 fully sealing design, rain proof, dust proof, adapted to all weather surroundings.